Use of bicycle=designated vs bicycle=yes OUTSIDE of Germany

Langlaeufer · 2022-09-30T18:13:26.808Z

gsapijaszko:

How they are “by law” if there is no sign for it?

That is German right. Since the introduction of non-mandatory cycleways, cycleway is an “indefinite legal concept”. Everything that looks like a cycleway and not like a footway is a cycleway, but the road traffic regulations don’t tell you how to recognize a cycle path. In case of a dispute, a court must decide if it looks like a cycleway. I think they wanted to save money on new signs and instead shifted the legal risk onto the cyclists.(Of course, there are now some judgments from which a few features of cycle paths can be derived.)

gsapijaszko · 2022-09-30T18:28:28.078Z

Langlaeufer:

That is German right.

Thank you for clarification. I’m sorry.

In such case assigning bicycle = yes doesn’t hurt. IMHO bicycle = yes means: bicycle is allowed on this (high)way. Up to cyclist to choose it or not.

Regards,
Grzegorz

Langlaeufer · 2022-09-30T18:33:06.225Z

gsapijaszko:

In such case assigning bicycle = yes doesn’t hurt.

But that is exactly the point for heated debates in the German community.
But please do not discuss how it should be used in this case. I’m interested in how other communities uses the two values yes and designated.

Richard · 2022-10-01T08:55:59.128Z

FWIW, cycle.travel largely treats bicycle=yes and bicycle=designated as identical for routing weighting purposes and for access parsing. (There are one or two edge cases.)

Nadjita · 2022-10-01T09:15:52.822Z

Richard:

cycle.travel largely treats bicycle=yes and bicycle=designated as identical for routing weighting purposes

And it should, because the purpose of a road/path doesn’t tell you how good it is for that purpose. smoothness, surface, number of traffic lights and whether pedestrians are also on the way, have a far greater impact.

But since we don’t tag for the router (an often repeated mantra), the question is: when do you tag designated as opposed to yes and why?

dieterdreist · 2022-10-01T10:04:38.000Z

But since we don’t tag for the router (an often repeated mantra), the question is: when do you tag designated as opposed to yes and why?

Maybe in retrospect it wasn’t wise to choose “yes” as bicycle value for the situation that they are allowed on footways, because the are not on par with pedestrians there, they may only go at walking speed and give way to pedestrians, which means not really comparable to either the street nor a cycleway or an unspecified generic path.

Cheers Martin

Richard · 2022-10-01T10:07:26.702Z

I’m in the UK, so the answer is “never”.

emvee · 2022-10-01T11:38:52.712Z

Nadjita:

But since we don’t tag for the router (an often repeated mantra), the question is: when do you tag designated as opposed to yes and why?

See my earlier reply for what is I think a workable definition or let’s discuss why that is not a good definition.

For how things are different per country OSM_tags_for_routing/Access_restrictions is likely a good source. For the UK, the table shows no use of bicycle=designated following the answer of @Richard.

The Default access restrictions for all countries unless otherwise specified on that page has bicycle=designated and checking all countries I see most countries follow that except for a few.

SomeoneElse · 2022-10-01T13:47:32.014Z

emvee:

For the UK, the table shows no use of bicycle=designated following the answer of @Richard.

As an aside, it should be noted that the table at https://wiki.openstreetmap.org/wiki/OSM_tags_for_routing/Access_restrictions#United_Kingdom implies that access restrictions across the United Kingdom are uniform. They are not. As an example, the rules in Scotland are substantially different to the rules in England (and Wales).

The rest of that paragraph is largely rubbish too - the statement "The legal status of cycles on public rights of way in England and Wales is disputed. On pavements, it is illegal to cycle unless designated … but on public footpaths the law is less clear " is one that is only advanced by the extremist end of the pro-cycling lobby; even Cycling UK (who can be relied upon for many daft suggestions) aren’t sure and only “suggest that it should be allowed”.

SomeoneElse · 2022-10-01T14:02:56.465Z

Nadjita:

when do you tag designated as opposed to yes and why?

I can give a specific answer to that for “foot” access - here (although that’s been heavily remapped since I used “foot=designated” here). There is a legal “access on foot” right of way that joins the road from the south and the north, but it’s actually a dangerous road to cross. There were blue signs telling pedestrians from the south to turn right, walk along the cycleway to the roundabut cross at the crossing there, and then walk back the other side. I tagged those sections as “foot=designated” as opposed to “foot=yes”. Since then another mapper has added “foot=designated; bicycle=designated” to the entire length of https://www.openstreetmap.org/way/894921545 which in a sense isn’t wrong (the cycleway was created for use by pedestrians and cyclists), but it does lose the sense of “pedestrians are specifically requested to do X” that was there before.

Other than that, @Richard is correct (“never”) for England and Wales, although Scotland has different rules and I’d defer to a local on how best to tag things there - I’m unsure how the Core Paths network handles “intended for mode X” in addition to the “Core Path” designation and the basic legal right that I linked to in the other post.

phidauex · 2022-10-01T17:15:48.422Z

Speaking a bit for the US here (though even that is a patchwork of different rules), there are very few cases where a cycleway is compulsory for bicycles and forbids other transportation methods. Usually the only implied forbidding is motor_vehicle. Everything else is generally allowed, though there may be different right of way expectations.

So when I’m mapping here, I follow the recommendation that @emvee noted, and interpret bicycle=designated to mean that the way is designed for bicycles, and bicycles are expected to be the primary user. This is stronger than “yes” because in a common law community you can ride bicycles nearly anywhere, but some routes are preferred because they were built for bicycles.

So to map this to the German case, the official blue traffic sign is the highest form of designated and it is backed by law. This is very uncommon in the US - if we followed this convention there would be almost no use of designated here for bicycles (or horse or foot, for that matter).

For the “case 2”, clearly identifiable as a cycleway, but not compulsory, then I’d ignore the law for the moment and focus on the intent. This would map in the US to something like this 36 Bikeway where I live - it is 27km long, wide, signed for bicycles, named for bicycles, etc. You could walk on it or ride a skateboard or crawl on your hands and knees, but the intent is clearly bicycles. In your case, because of the above convention about designated implying no for everything else, you’d want to then add the various yes's for foot, horse, etc.

Peter_Elderson · 2022-10-01T22:46:06.000Z

My 2cts:

Is the way made for / designated to bicycles?
a. Yes: then highway=cycleway.
Proof is ideally a traffic sign, but other markings or typical design (defined locally) may tell the tale.
bicycle=yes is implied. All other legal and customary implications or exclusions differ by country / region / maybe even by city. Probably foot=yes can safely be assumed, and horse=no, but vehicle access differs widely AND changes over time. No surface type should be assumed. So many situations require explicit tagging.

b. No; it’s not a cycleway. Goto 2.

2 Is this a type of way where bicycles normally may ride AND where bicycles do not have an alternative they are supposed to use?
This is country-specific. Use the access-wiki with access rules by country and by road type.
Yes: you’re fine.

No: if it’s an exception. tag bicycle=yes.
Not clear: tag bicycle=yes to be sure.

Is this a type of way where bicycles normally may ride, but has been dedicated firstly to cycling, while still allowing other vehicles “as guests” with regard to speed and priority?
tag bicycle=designated and explicit access for all other vehicles. There is probably a speed limit as well.

If bicycles have an alternative they are supposed to use (e.g. a lane or a side path) tag it on the highway (e.g. with bicycle=lane or bicycle=use_sidepath)

In all non-standard situations, tag explicit access. E.g. if a moped is allowed on the separately mapped cycleway as well as on the road, tag moped=yes on the road AND on the cycleway.

In short,
bicycle=yes means access for bicycles.
highway=cycleway means it’s a cycleway verifiably (signs, markings, construction) made for or assigned to bicycles; bicycle=designated is implied, but other access rules (exclusions/inclusions) may vary.
bicycle=designated on a different road type or path means it’s not a cycleway per se but it’s formally dedicated firstly to bicycles, while not implicitly excluding other traffic.

bradrh · 2022-10-02T02:02:45.540Z

I’m in the US (CO), and never use ‘designated’, always ‘yes’ if they are allowed. I don’t see the value in ‘designated’. There are very very few paths where bikes hold a priority over walkers.

ezekielf · 2022-10-02T12:56:55.256Z

I’ve used bicycle=designated to mean designed and managed for bicycles as documented on the wiki. However, this piece of information is not about access so it would probably be better if wasn’t part of the access tagging scheme. I consider bicycle=designated and bicycle=yes to have exactly the same meaning with regards to access.

Access tagging ambiguity

Access tagging ambiguity

Right now we have one tag value trying to store two pieces of information - “what is the legal right of access of traffic mode X” and “was this highway=whatever designed for the use of traffic mode X”.

Yes, this is the core of the issue. designated does not make sense as an access value. It seems people have been pointing this out since 2008 . We should have a parallel scheme to specify the transport mode a way is designed/intended/designated to be to used by. Something like designated:for=moped;carriage;horse;etc would make sense if data consumers could be counted on to reliably parse semicolon delimited values.

Mateusz_Konieczny · 2022-10-03T06:31:32.656Z

SomeoneElse:

The rest of that paragraph is largely rubbish too - the statement "The legal status of cycles on public rights of way in England and Wales is disputed. On pavements, it is illegal to cycle unless designated … but on public footpaths the law is less clear " is one that is only advanced by the extremist end of the pro-cycling lobby; even Cycling UK (who can be relied upon for many daft suggestions) aren’t sure and only “suggest that it should be allowed”.

So “but on public footpaths the law is less clear” should be removed?

(I added " Note: access restrictions across the United Kingdom are NOT uniform, see this note" already)

Richard · 2022-10-03T07:59:56.212Z

SomeoneElse:

even Cycling UK (who can be relied upon for many daft suggestions)

I think that was British Cycling being daft rather than Cycling UK (and yes, the organisation names are confusing!).

aharvey · 2022-10-05T01:45:57.222Z

In Australia we use bicycle=designated where it’s signposted or otherwise marked as for use by bicycles, this might be a bicycle logo painted on the surface, or a bicycle sign. bicycle=yes is for where bicycles are allowed to use the way, but it’s not signposted or marked as for bicycles (ie. implicitly).

Shared paths are common here which are equally for pedestrians and bicycles and we tag them highway=cycleway + bicycle=designated + foot=designated + segregated=no.

Not that our use of bicycle=designated doesn’t mean cyclists have to use that way rather it’s signposted that they are allowed to use it.

Peter_Elderson · 2022-10-06T19:00:43.510Z

I would say bicycle=designated is redundant for this case. A cycleway is a path designated for cycling, as you described.

Minh_Nguyen · 2022-10-07T08:39:05.744Z

Hungerburg:

Mandatory ones, they are designated by a round blue sign.

This is an important point. In countries that adhere to the Vienna Convention, mandatory signs are an important category of signs that correspond to certain traffic rules. is part of this convention.

By contrast, in the United States, mandatory signs officially don’t exist at all, and neither does the legal basis for them. The closest thing is the occasional “must” on a regulatory sign, such as obligating cyclists to make a two-stage turn. But regulatory signs about access either say that you may or you may not, so there isn’t an obvious opportunity to use access values such as designated and use_sidepath.

Some jurisdictions have antiquated laws requiring cyclists to use a sidewalk if provided, but people don’t tend to map such laws because they’re uniform across the whole region and not well known. Or the laws are full of obscure conditions about age, age of the accompanying adult, etc. that no one knows how to tag.

I tend to use bicycle=designated instead of bicycle=yes because iD’s Cycle & Foot Path preset uses bicycle=designated foot=designated. If that’s imprecise, then at least there’s little practical harm compared to omitting foot=* from a highway=cycleway, which does break routing.

That said, there are situations where I find it important to distinguish between bicycle=designated and a mere bicycle=yes, for example:

commons.wikimedia.org

File:Little Miami State Park sign looking southbound from Harrison Street, Loveland, Ohio, October 2018.jpg

I would interpret the icons on this sign as foot=designated horse=designated bicycle=designated wheelchair=designated moped=no hunting=no. Although it’s perfectly legal to bike on the parallel residential road (bicycle=yes), you would “go out of your way” in doing so. (The ⅓ route shield calls for a route=bicycle relation but doesn’t affect the access tags in any way.)

commons.wikimedia.org

File:American River Bike Trail at Fair Oaks.jpg

This trail is officially a multi-use path for pedestrians and cyclists. An occasional park rules sign reminds pedestrians to keep off the paved trail and stay on the sandy shoulder when possible. This rule isn’t strong enough to relegate pedestrians to foot=no shoulder:foot=designated, but it does establish cyclists as having the right of way. (Unusually, cyclists even have the right of way over motor vehicles at crossings.)

commons.wikimedia.org

File:2022-03-28 08 32 10 View west-northwest along Santa Clara County Route G6 (Central Expressway) from the overpass for North Sunnyvale Avenue in Sunnyvale, Santa Clara County, California.jpg

This expressway=yes has a bike lane. Can you see it? It’s indistinguishable from a shoulder, except for an occasional “Begin Turn Lane – Yield to Bikes” sign at an off-ramp. The local highway department has a policy of keeping the bike lane as low-key as possible. They don’t want casual cyclists to find out about it, because the heavy traffic at 50 mph would be hazardous. Nevertheless, this is a popular commuting route for more experienced cyclists.

In the West, some stretches of Interstate freeway allow cyclists because there’s no other connection, short of dismounting and climbing a mountain. But even though these freeways have all the relevant signs allowing cycling, they would be only bicycle=yes because they only allow cyclists by necessity.

Aside from these cases, if you prefer to tag a bike trail as highway=path instead of highway=cycleway, then bicycle=designated is the most obvious way to refine it as a bike trail as opposed to a trail that happens to allow cyclists. Iterative refinement is also possible with path=*, but that key is about physical construction rather than usage.

gyotoku810 · 2022-10-07T12:47:19.542Z

In Japan, there is no common tagging scheme for bicycle=* yet. I’m just proposing a new idea to distinguish between bicycle=designated and bicycle=yes on the talk-ja mailing list.

There are two types of signs in Japan that indicate bicycles are allowed on footways. These roads have legally different traffic rules.
(1) A “For bicycles and pedestrians only” sign (a sign with a picture of a bicycle and pedestrians)
(2) A “For pedestrians only” sign with a “Except bicycles” auxiliary sign (see photo)

20220505_155806614×785 155 KB

In the proposal, they are distinguished by bicycle=*:
(1) → highway=footway/pedestrian + bicycle=designated
(2) → highway=footway/pedestrian + bicycle=yes