Status: An unexpected error occured in Gosmore: on YOURS installation

MIftakhul_Anwar · 2011-12-21T07:13:23.000Z

I try installed YOURS on my local computer.
I have followed instruction from http://wiki.openstreetmap.org/wiki/YOURS.

But when i access it via browser, i can’t found map on it ?

What’s wrong with my installation ?

What should i do to solve this issue ?

Thanks

MIftakhul_Anwar · 2011-12-22T06:25:04.000Z

oh. actually i have wrong in source code.I should checkout from http://svn.openstreetmap.org/applications/routing/yours/branches/version-1.0-via

Ok, this is step by step which i did to install YOURS

i following reference from http://wiki.openstreetmap.org/wiki/YOURS and checkout from http://svn.openstreetmap.org/applications/routing/yours/branches/version-1.0-via
i checkout gosmore source from http://svn.openstreetmap.org/applications/rendering/gosmore
rebuild my file planet.osm.bz2 use gosmore with command : bzcat country.osm.bz2 | ./gosmore rebuild
output is default.pak file
i put YOURS/* to /var/www so i can acces it via browser with http://localhost
now i can access map, but when i make a route from one location to another location and click find route, error message :Status: An unexpected error occured in Gosmore: appear

i check on /var/log/apache2/error.log and i get this error message :



[Thu Dec 22 13:18:01 2011] [error] [client 127.0.0.1] PHP Notice:  Undefined index: format in /home/maple/yours/api/1.0/gosmore.php on line 105, referer: http://localhost/

[Thu Dec 22 13:18:01 2011] [error] [client 127.0.0.1] PHP Warning:  fopen(/home/maple/yours/commands.log): failed to open stream: Permission denied in /home/maple/yours/api/1.0/gosmore.php on line 140, referer: http://localhost/

[Thu Dec 22 13:18:01 2011] [error] [client 127.0.0.1] PHP Warning:  chdir(): No such file or directory (errno 2) in /home/maple/yours/api/1.0/gosmore.php on line 146, referer: http://localhost/
nice: ./gosmore: No such file or directory

[Thu Dec 22 13:18:01 2011] [error] [client 127.0.0.1] PHP Warning:  fopen(/home/maple/yours/requests.csv): failed to open stream: Permission denied in /home/maple/yours/api/1.0/gosmore.php on line 235, referer: http://localhost/

[Thu Dec 22 13:18:01 2011] [error] [client 127.0.0.1] PHP Warning:  fopen(/home/maple/yours/requests.csv): failed to open stream: Permission denied in /home/maple/yours/api/1.0/gosmore.php on line 242, referer: http://localhost/

MIftakhul_Anwar · 2011-12-22T13:42:17.000Z

I have solve error about with created file and folder manually, but i still get error.Now error message like below


[Thu Dec 22 20:39:01 2011] [error] [client 127.0.0.1] PHP Notice:  Undefined index: format in /home/maple/yours/api/1.0/gosmore.php on line 105, referer: http://localhost/
nice: ./gosmore: No such file or directory

What should i do ?

MIftakhul_Anwar · 2011-12-27T01:41:57.000Z

Now i use German.pak which i downloaded from http://dev.openstreetmap.de/gosmore/
Firstly when i try routing with accessing localhost on browser it doesn’t work, becuase of this code i think:


/*switch ($layer) { 
case 'cn': 
    $gosmore = '/normal'; 
    $style = 'cyclestyles.xml'; 
    break; 
case 'test': 
    $gosmore = '/test'; 
    $style = 'elemstyles.xml'; 
    break; 
default: 
    $gosmore = '/normal'; 
    $style = 'genericstyles.xml'; 
    break; 
}
 
$dir = $yours_dir.$gosmore;

when i check on some folders, i can’t get some xml file include gosmore.i found elemstyles.xml only.
After i commented these line and change


$dir = $yours_dir.$gosmore;

be


$dir = $yours_dir;

Now my routing works well.I can create route on Germany map. .Its running on ubuntu 10.10

But now i try using it on Ubuntu 11.10 server.

After i checkout source then i got error when execute :


$ make
gcc -lm density.c -o density
/tmp/ccNQSatu.o: In function `main':
density.c:(.text+0x21f): undefined reference to `exp'
density.c:(.text+0x224): undefined reference to `atan'
density.c:(.text+0x2c3): undefined reference to `exp'
density.c:(.text+0x2c8): undefined reference to `atan'
density.c:(.text+0x5d3): undefined reference to `exp'
density.c:(.text+0x5d8): undefined reference to `atan'
density.c:(.text+0x67a): undefined reference to `exp'
density.c:(.text+0x67f): undefined reference to `atan'
density.c:(.text+0x723): undefined reference to `exp'
density.c:(.text+0x728): undefined reference to `atan'
density.c:(.text+0x793): undefined reference to `exp'
density.c:(.text+0x798): undefined reference to `atan'
collect2: ld returned 1 exit status
make: *** [jni/bboxes.c] Error 1

is it bug of gosmore on ubuntu 11.10 or what is this ?
How to solve this ?

greencaps · 2011-12-27T10:15:15.000Z

MIftakhul Anwar:

gcc -lm density.c -o density

The functions exp() and atan() (exponent and arctangens) are part of the standard math library.
The linker complains that it cannot find them.

There are several way to solve this problem. The quickest would be to use g++ instead of gcc:
g++ -lm density.c -o density

Please try this first.

MIftakhul_Anwar · 2011-12-27T15:21:52.000Z

How to get it ?

because it’s default execute


gcc -lm density.c -o density

when i use command :


make

I have try execute command below first:


g++ -lm density.c -o density

but when i execute make, it still error

greencaps · 2011-12-27T17:10:45.000Z

MIftakhul Anwar:

I have try execute command below first:
g++ -lm density.c -o density 

And … what did it?

MIftakhul_Anwar · 2011-12-28T02:18:33.000Z

if i execute command :

make

“Make” will execute “gcc -lm density.c -o density”.You give advice to me to use “g++ -lm density.c -o density” instead of “gcc -lm density.c -o density”

So i execute g++ -lm density.c -o density manually,

Or how should i do ?

greencaps · 2011-12-28T09:29:41.000Z

MIftakhul Anwar:

So i execute g++ -lm density.c -o density manually,

Yes. That was what I asked you to do.

Please report what happened.

MIftakhul_Anwar · 2011-12-28T09:46:08.000Z

Nothing happen

after i execute that command and i exeucte “make”.Error still same

greencaps · 2011-12-28T10:17:28.000Z

Do not execute make. Only do
g++ -lm density.c -o density

What do you see?

Ok… nothing happen. You don’t see anything. Ok.

If you execute make then the program make will look for a file makefile (under your hands) and execute the commands written in there. Please post the contents of makefile here.

MIftakhul_Anwar · 2011-12-28T10:28:38.000Z

Ok, this is content of MakeFile


# Written by Nic Roets with contributions by Petter Reinholdtsen
# Placed in the public domain

TODAY := `exec date +%Y%m%d`
VERSION = 0.0.0.$(TODAY)

DESTDIR=
prefix = /usr/local
bindir = $(prefix)/bin
datarootdir = $(prefix)/share

CFLAGS=-O2 -DRES_DIR=\"$(prefix)/share/gosmore/\"
WARNFLAGS= -W -Wall

#"------------------------ Compiling with cegcc : ---------------------------
# tar xzf -C / cygwin-cegcc-mingw32ce-0.51.0-1.tar.gz
# export PATH="$PATH":/opt/mingw32ce/bin/

WINDRES=    ${ARCH}windres

# enable this to test the experimental route support
#CFLAGS += -DROUTE_TEST

# enable this to force gosmore into headless mode (gosmore will also
# be put in headless mode if gtk+-2.0 isn't available)
#CFLAGS += -DHEADLESS

ifneq (${OS},Windows_NT)
EXTRA=`pkg-config --cflags --libs gtk+-2.0 || echo -D HEADLESS` \
  `pkg-config --libs libcurl` \
  `[ -e /usr/include/gps.h ] && echo -DUSE_GPSD -lgps `\
  `pkg-config --libs pkg-config --libs gthread-2.0`

# I found that it's more reliable and more portable to use aplay, but
# gnome sound can still be activated with this:
#  `pkg-config --cflags --libs libgnomeui-2.0 && echo -DUSE_GNOMESOUND`
XMLFLAGS=`pkg-config --cflags libxml-2.0 || echo -I /usr/include/libxml2` \
  `pkg-config --libs libxml-2.0 || echo -l xml2 -lm`
ARCH=arm-mingw32ce-
else

EXTRAC=-Ilibxml2-2.7.8/include \
  `pkg-config --cflags gtk+-2.0 || echo -D NOGTK`

EXTRAL=`pkg-config --libs gtk+-2.0` \

EXE=.exe
W32LIBS=-Llibxml2-2.7.8/.libs -lxml2 -lwsock32 -lwinmm  -lgdi32

endif

all: gosmore$(EXE)

gosmore:    jni/gosmore.cpp jni/libgosm.cpp jni/libgosm.h jni/bboxes.c \
        jni/openglespolygon.h jni/openglespolygon.cpp
        g++ -DCHILDREN=16 ${CFLAGS} ${WARNFLAGS} ${XMLFLAGS} \
                  jni/gosmore.cpp jni/libgosm.cpp jni/openglespolygon.h \
                  jni/openglespolygon.cpp -o gosmore ${EXTRA}

gosmore16:    jni/gosmore.cpp jni/libgosm.cpp jni/libgosm.h
        g++ -DGOSMZ=16 ${CFLAGS} ${WARNFLAGS} ${XMLFLAGS} \
                  jni/gosmore.cpp jni/libgosm.cpp -o gosmore16 ${EXTRA}

$(ARCH)gosmore.exe:    jni/gosmore.cpp jni/libgosm.cpp gosmore.rsc resource.h \
                    jni/libgosm.h ceglue.h ceglue.c bboxes.c
        ${ARCH}g++ ${CFLAGS} ${EXTRAC} -c jni/gosmore.cpp
        ${ARCH}g++ ${CFLAGS} ${EXTRAC} -c jni/libgosm.cpp
        ${ARCH}gcc ${CFLAGS} ${EXTRAC} -c ConvertUTF.c
        ${ARCH}gcc ${CFLAGS} ${EXTRAC} -c ceglue.c
        ${ARCH}g++ -static ${EXTRAL} \
          gosmore.o libgosm.o ceglue.o ConvertUTF.o gosmore.rsc $(W32LIBS)  -o $@

tagcmp.o:    tagcmp.l

gosmore.rsc:    gosmore.rc icons.bmp icons-mask.bmp gosmore.ico
        $(WINDRES) $< $@

WIKIPAGE=http://wiki.openstreetmap.org/index.php/Special:Export/Gosmore
translations.c: extract
        wget -O - ${WIKIPAGE}/Translations |./extract >jni/translations.c

extract:    extract.c
        ${CC} ${CFLAGS} ${XMLFLAGS} extract.c -o extract

jni/bboxes.c:    density.c density.txt
        gcc -lm density.c -o density
        ./density <density.txt >density.sh
# wget http://www.openstreetmap.org/api/0.6/changeset/1707270/download -O \
#   countries.osm

osmunda:    osmunda.cpp jni/libgosm.cpp jni/libgosm.h
        g++ ${CFLAGS} ${WARNFLAGS} ${XMLFLAGS} \
          osmunda.cpp jni/libgosm.cpp -o osmunda
voices:
        echo '(voice_rab_diphone)' >/tmp/voice_rab_diphone
        echo 'At the junction, turn left.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output turnleft.wav --ttw
        echo 'At the junction, turn right.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output turnright.wav --ttw
        echo 'Keep left.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output keepleft.wav --ttw
        echo 'Keep right.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output keepright.wav --ttw
        echo 'If possible make a U turn.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output uturn.wav --ttw
        echo 'You have reached your destination.' | festival_client \
          --prolog /tmp/voice_rab_diphone --output stop.wav --ttw
        echo 'At the roundabout take the first exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round1.wav --ttw
        echo 'At the roundabout take the second exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round2.wav --ttw
        echo 'At the roundabout take the third exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round3.wav --ttw
        echo 'At the roundabout take the fourth exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round4.wav --ttw
        echo 'At the roundabout take the fifth exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round5.wav --ttw
        echo 'At the roundabout take the sixth exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round6.wav --ttw
        echo 'At the roundabout take the seventh exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round7.wav --ttw
        echo 'At the roundabout take the eight exit.' | \
  festival_client --prolog /tmp/voice_rab_diphone --output round8.wav --ttw

#elemstyles.xml:
#        wget http://josm.openstreetmap.de/svn/trunk/styles/standard/elemstyles.xml

zip:
    (cd /msys; zip - etc/gtk-2.0/* lib/gtk-2.0/2.10.0/loaders/*) >gosmore.zip
    zip -j gosmore.zip gosmore.exe icons.xpm /msys/bin/libcairo-2.dll \
    /msys/bin/lib*.dll /msys/bin/intl*.dll /msys/bin/zlib*.dll
    zip -j gosm_arm.zip ARMV4Rel/gosm_arm.exe *.wav
    # scp -P 100 gosm_arm.zip gosmore.zip \
    #  nroets@nroets.openhost.dk:nroets.openhost.dk/htdocs/

install: gosmore default.pak
    mkdir -p $(DESTDIR)$(bindir)
    cp gosmore $(DESTDIR)$(bindir)/.
    mkdir -p $(DESTDIR)$(datarootdir)/gosmore
    cp -a *.wav default.pak elemstyles.xml icons.csv icons.xpm \
      $(DESTDIR)$(datarootdir)/gosmore
    mkdir -p $(DESTDIR)$(datarootdir)/man/man1
    gzip <gosmore.1 >$(DESTDIR)$(datarootdir)/man/man1/gosmore.1.gz
    mkdir -p $(DESTDIR)$(datarootdir)/pixmaps
    cp -a gosmore.xpm $(DESTDIR)$(datarootdir)/pixmaps
    mkdir -p $(DESTDIR)$(datarootdir)/applications
    cp -a gosmore.desktop $(DESTDIR)$(datarootdir)/applications

# The commands below will create a gpx file with a low res version of the national boundaries
# Then you must open tmp.gpx in JOSM and save it as bounds.osm. Then this makefile will
# use sed to reencode the ids to the 2 billion range and use grep to concatenate it with
# the geonames cities and the osm country names.
#
# sudo apt-get install libshp-dev
# wget http://www.obviously.com/gis/shp2text/shp2text.c
# gcc -lshp shp2text.c -o shp2text
# wget http://www.naturalearthdata.com/http//www.naturalearthdata.com/download/110m/cultural/110m-admin-0-countries.zip
# unzip 110m-admin-0-countries.zip
# ./shp2text --gpx 110m-admin-0-countries.shp 0 4 |
#   gpsbabel -r -i gpx -f - -x transform,trk=rte,del -o gpx -F tmp.gpx
  
default.pak: gosmore
    ! [ -e gosmore.pak ]
    (bzgrep -v '</osm>' bounds.osm.bz2 | sed -e 's/'\''-\([0-9]*'\''\)/'\''00000000\1/' |\
      sed -e 's/0*\([0-9]\{8\}'\''\)/21\1/'; \
     bzcat lowres.osm.bz2; \
     egrep -v '?xml|<osmCha' countries.osm | sed -e 's|/osmChange|/osm|') | \
         QUERY_STRING=suppressGTK ./gosmore rebuild
    mv gosmore.pak default.pak

routingTest: gosmore
    ! [ -e gosmore.pak ]
    sed -e 's/\(nd='\''\|ref='\''\|id='\''\)-\([0-9]*'\''\)/\121000\2/' routingTest.osm |\
      ./gosmore rebuild

dist:
    mkdir gosmore-$(VERSION)
    cp jni/gosmore.cpp Makefile elemstyles.xml icons.csv icons.xpm  README \
      gosmore-$(VERSION)
    tar zcf gosmore-$(VERSION).tar.gz gosmore-$(VERSION)
    rm -rf gosmore-$(VERSION)

clean:
    $(RM) gosmore *.tmp *~ gosmore.zip $(ARCH)gosmore.exe gosmore.rsc \
      gosmore.aps gosmore.vcl gosmore.vcw extract *.o

greencaps · 2011-12-28T10:45:52.000Z

You see that the line
gcc -lm density.c -o density
is in the makefile.

We know alreadyy that you see nothing if you execute on the commandline
g++ -lm density.c -o density

But what do you see if you execute
gcc -lm density.c -o density

Please report. Meanwile i will look at the makefile.

MIftakhul_Anwar · 2011-12-29T02:12:07.000Z

Thanks Greencaps,

A developer have fixed that issue yesterday.Actually, gosmore have bugs when running on ubuntu 11.10.But now it works well.
I have checkout new sources and gosmore and YOURS have run well.

But namefinder on my routing is disable, how to enable it ?
When i enter location on both of “From” textboxt and “To” tetboxt there’is error message

“Status: Namefinder reports: This service is permanently disabled”

Please check it out on www.osmosa.net/routing

Any advices?

Thanks

greencaps · 2011-12-29T15:41:03.000Z

MIftakhul Anwar:

A developer have fixed that issue yesterday.

Nice. Of course we are interested how he did that.

MIftakhul_Anwar · 2011-12-30T07:20:19.000Z

How about “Status: Namefinder reports: This service is permanently disabled” ??

h4ck3rm1k3 · 2012-04-18T21:58:24.000Z

I just answered your question on stackoverflow
http://stackoverflow.com/a/10218656/782168

HI there, the problem is the ordering of the arguments.
I am not happy with this makefile, here is a patch https://github.com/h4ck3rm1k3/gosmore/commit/67bd8e2dd7e76de47a31b3c3df1ab33b8fda797b