Some places have both a node and a way

osmuser63783 · 2024-06-12T17:43:02.260Z

Zeke Farwell:

In my city, previous mappers added polygons for named areas tagged place=neighborhood + landuse=residential (example history ). For each of these I’ve been creating a new boundary=place relation made up of the original way and a new place node with the label role. I tag both the relation and the node with place and name, but remove those tags from the way.

Same here! I’m looking at an area where neighbourhoods have been mapped twice - as areas, for geocoding, and as nodes. I’ve been trying to figure out what to do with it, because some renderers will show the place name twice.

The solution you have described sounds good, because it should allow data consumers to deduplicate. It is sort of documented on the Wiki, under the boundary=place page, but the main Key:place page just talks about nodes or areas but not both.

I am thinking of adding something like the following:

When a settlement is mapped both as an area and as a node, the two can be combined into a relation: When the place corresponds to an administrative boundary, the place node can be added to the relation with role=label. When the boundary is not an administrative boundary (but can still be verified), use boundary=place instead.

Does that sound good to everyone?

It seems to be a not uncommon scenario. Of 135,988 suburb nodes, 9,547 or so duplicate an area, at least as far as I can see (same name, same place value, and the node is within the area). In 4,179 cases the node isn’t part of any relation.

Minh_Nguyen · 2024-06-12T17:59:34.898Z

I think the suggested guidance is an accurate reflection of current practice. However, I don’t think the combination of place points and place boundaries completely obviates the need for named landuse areas. I don’t want to derail this thread any further, but suffice it to say that a place boundary is a very uncommon approach to mapping an apartment complex or mobile home park. We shouldn’t have a completely different approach to modeling those planned residential communities as we have for a subdivision (estate) of single-family homes, especially since a given neighborhood can be a mix of housing styles.

Kovoschiz · 2024-06-13T07:53:51.247Z

To conclude, I will point to previous posts on this topic, including my view on why place= is not the same as them, and landuse= + name= should have an actual feature as shop=mall , man_made=works , amenity=school are for landuse= =retail , =industrial , =education (ignoring the latter two’s debate or chronological order) Add a Residential Property area-type for individual properties - #23 by Kovoschiz

(re)define the residential tag list
Tagging solution for gated housing estates

osmuser63783 · 2024-06-13T17:49:24.821Z

Minh_Nguyen:

However, I don’t think the combination of place points and place boundaries completely obviates the need for named landuse areas

I agree, the neighbourhoods and suburbs I am looking at (that are mapped as place node and area) are much bigger than the average housing estate, they can consist of multiple housing estates (which can be mapped as named residential landuses), as well as other landuses (e.g. an industrial estate) and mixed-use historical centres / high streets because they often grew as villages before being amalgamated into the city.

Duja · 2024-06-14T09:54:43.673Z

Minh_Nguyen:

I think the suggested guidance is an accurate reflection of current practice. However, I don’t think the combination of place points and place boundaries completely obviates the need for named landuse areas. I don’t want to derail this thread any further, but suffice it to say that a place boundary is a very uncommon approach to mapping an apartment complex or mobile home park. We shouldn’t have a completely different approach to modeling those planned residential communities as we have for a subdivision (estate) of single-family homes, especially since a given neighborhood can be a mix of housing styles.

Named landuse areas sort of do the job, and I’ve used them myself… however, I find this approach inconsistent with our general principle that a named human settlement should get a place tag. We have a plethora of place tags, including some quite exotic such as isolated_dwelling or farm (why don’t you draw a building or a farmyard instead?) as well as a city_block or, god forbid, plot. So what would be wrong with something like place=estate (insert a better name) for similar gated communities, sub-neighborhoods and like?

I’m not even against double tagging, but I’d really prefer to have:
name=Arbor Oaks; landuse=residential
accompanied with
place=estate

Imagine that you’re developing a mobile app for taxi or delivery purposes, and you’d like to display a map that facilitates navigation. So at minimum, you’d need to download only the information about highways, places and addrs, perhaps buildings… but suddenly, you also need to query for landuse=residentials you normally don’t care about so that you have those gated communities mapped. Yeah, OSM is chaotic and inconsistent, but here we have inconsistency for no good reason (except for *we’ve always done it this way”).

Kovoschiz · 2024-06-14T11:07:33.812Z

Ok I will continue here for cohesiveness, until someone moves these. =estate doesn’t fit into place= . As mentioned in my linked reply, a housing estate can be any size, from below =plot , to a =subrub and even close to a =town . Now you don’t know how to address it among other levels, navigate to it, or cartographically present it for viewing, search, and rendering.
A housing estate usually has well-defined extents, while most other place= don’t as abstract concepts of communities. On a minor note, industrial parks were called industrial “estates”, or trading “estates”, in UK, so this isn’t intuitively restricted to residential.
You could point to =island and =islet etc, but fundamentally looking they aren’t the best choice, besides not referring to communities. These two in particular seem to facilitate “double-tagging” 2 different meaning feature tags on natural=coastline , strictly speaking a violation of One Feature One Object, worsened by the linear vs area feature difference.
Of course, =plot has the same problem, as it too can vary size. boundary=lot isn’t more popular yet, but the vast majority of =plot are imported as seen from the jumps in number.
place=farm you mentioned is another oddity that should really be moved, which again can be in different scales. However for =isolated_dwelling , it has a different meaning specifically for lone homes posing as an addressed or navigable settlement of its own, a 1 or 2 house village-equivalent so to speak. It isn’t used for any random building= home. This basically has a fixed size, while housing estates don’t.
To work in an application, I’m sure you do need to have boundary=administrative as well… And most industrial facilities are landuse=industrial lacking a feature tag, which there have been debates and proposals trying to fix that (viz usage of industrial= vs clearly establishing man_made=works ) .

Duja · 2024-06-14T11:36:30.964Z

Kovoschiz:

=estate doesn’t fit into place= . As mentioned in my linked reply, a housing estate can be any size, from below =plot , to a =subrub and even close to a =town . Now you don’t know how to address it among other levels, navigate to it, or cartographically present it for viewing, search, and rendering.

I don’t see it that way, sorry. While I agree that an “estate” (maybe “complex” is more appropriate) is a) named, b) has clearly defined extents, and c) may be residential, industrial or commercial [and d) usually has been built and maintained by a single operator, I would add] I don’t think it can be just any size. Most complexes of this type I’m having in mind are size of a neighbourhood or smaller. Actually, I’d say that “neighbourhood” might fit in many cases, if it wasn’t already used for older, larger, informal surroundings of such complexes.

If you have a place larger than that, go ahead and tag it as quarter or even a town; those are generic tags which can be applied by any mapper’s best judgment. I foresee that this place=estate/complex tag, if we ever introduce it, will end up with slightly different interpretations across the world, since the world is a colo(u)rful place.

The first example that crossed my mind was New York City’s famous block called World Trade Center, so I went ahead to check how it’s tagged… and it is not. While there are several things having “World Trade Center” in the title, the closest thing is this place=locality node which doesn’t do it justice. And I would argue that the thing called “World Trade Center” occupies a well-defined couple of blocks between West Street, Church Street, Vesey Street and Liberty Street, with a mixed commercial and memorial landuse.

Minh_Nguyen · 2024-06-14T14:22:07.575Z

Duja:

I’m not even against double tagging, but I’d really prefer to have:
name=Arbor Oaks; landuse=residential
accompanied with
place=estate

In the early days, I used to use place=subdivision exactly like this. (I didn’t know the British term “housing estate” yet.)

I don’t have a problem with this approach per se, but I do find named landuse areas to be a closer reflection of what these planned suburban developments are intended to be: a homogeneous area of land use, big or small, that is strongly associated with a particular name. These developments constitute an alternative for finding your way around a typical American suburb, parallel to any system of neighborhood names.

Moreover, as weird as it may seem that there are brands of apartment complexes in the U.S., I think it would be even weirder to brand places than landuse areas.

Kovoschiz · 2024-06-14T15:17:48.739Z

And what about =city_block , and =plot ? How can the larger ones as =quarter be indicated as a housing estate, with something else that’s different from place=estate ? What you suggest means place=estate counterintuitively doesn’t handle all housing estates. That’s misleading and a fragmented solution. Housing estate, gated community, whatever else is a concept orthogonal to the place= hierarchy. Mixing them isn’t a good solution from start.
What I may have said elsewhere, shop=mall and man_made=works are used for malls and factories besides landuse= =retail and =industrial , not some place= as awkward as =farm . I don’t see why should place= be expanded to more things covering different aspects.

Kovoschiz · 2024-06-14T15:20:46.311Z

Branded apartment is a mainstay in Korea. It even indicates social status, and is played out by chaebol controlling much part of everyday life.

Duja · 2024-06-14T15:42:43.037Z

Kovoschiz:

How can the larger ones as =quarter be indicated as a housing estate, with something else that’s different from place=estate ?

But it was you who claimed that estates as large as a quarter or even a town exist in the first place, without giving an example that I’ve seen. In my view, an “estate” is smaller than or equal to a “neighbourhood”, depending on situation.

Kovoschiz:

Housing estate, gated community, whatever else is a concept orthogonal to the place= hierarchy. Mixing them isn’t a good solution from start.

No, I don’t think that place= is a strict hierarchy in the first place, so you can’t be “orthogonal” to it. I see it as a dictionary of common types of (un)populated places, roughly scaled by size and characteristics, and where we are forced to find best fits. And currently I don’t see a slot there for named, planned-construction small residential blocks, gated or not.city_block is the nearest, but not quite adequate fit.

Kovoschiz · 2024-06-14T19:28:35.020Z

I’m asking if you suggest housing estates of larger sizes can use =quarter etc, isn’t it that they can’t be indicated as housing estates first, which is using place=estate . So we shouldn’t try to use place= for something that can exist in different corresponding place= scale. They have highly varying quantitative and qualitative aspects that aren’t “roughly scaled by size and characteristics” .
Orthogonality is not the same as whether is a hierarchy. It’s means whether something can be considered as both things somehow. You said =neighbourhood “might fit” in theory. Doesn’t that mean they are comparable enough? But the complex is a housing estate, the surrounding isn’t.
Your idea about =complex applying to WTC shows neither what use it is, nor what scale and importance it is. A office park or business park can be very large, an industrial park larger yet. One such “complex” feature that already exists is shop=mall . It doesn’t use place= .

Minh_Nguyen · 2024-06-14T20:39:59.220Z

Duja:

Kovoschiz:

How can the larger ones as =quarter be indicated as a housing estate, with something else that’s different from place=estate ?

But it was you who claimed that estates as large as a quarter or even a town exist in the first place, without giving an example that I’ve seen. In my view, an “estate” is smaller than or equal to a “neighbourhood”, depending on situation.

Since we’ve basically taken over this thread by now, I’ll give some large examples from the U.S. that demonstrate the messy status quo:

The Woodlands is one of the largest master-planned residential developments in Texas, with over 114,000 residents. But OSM has not mapped the extent of this development per se. Instead, we’ve apparently mapped the census-designated place as a city boundary relation, even though it’s merely a statistical convenience for demographers. We’ve mapped all manner of landuse area inside the boundary, mostly reflecting landcover. And we’ve mapped a place=city node, reflecting the populated place’s size and geographic isolation. Multiple subdivisions within this development are mapped as place=village nodes and level 10 administrative boundaries, even though these divisions are of a private nature rather than public administration.

The Woodlands CDP includes a variety of residential landuse areas, woodlands, golf courses, and some retail areas.1920×1269 297 KB
Wetherington is a large gated community in Ohio with over 1,300 residents. As with The Woodlands, we’ve mapped the CDP as a place multipolygon and a place=hamlet node (a bit incongruous for this endless sea of suburban sprawl). But we’ve also mapped the gated community itself as a named landuse area that excludes some adjacent retail areas that aren’t gated off while including the golf course that is an integral part of the community. The golf course overlaps the residential landuse area.

The Wetherington CDP includes most of the Wetherington subdivision but also some newer related developments, both residential and retail.1920×1269 226 KB
Landen is another large development nearby. The CDP includes many other adjacent developments that are only informally known as “Landen”. Unlike Wetherington, the actual Landen development isn’t gated and consists of many smaller named subdivisions. Each subdivision is mapped as a separate landuse area but has also been combined into an (invalid) multipolygon relation.

The Landen CDP includes many residential and retail areas that have nothing to do with the Landen development, other than that people sometimes casually refer to the general area as “Landen”.1920×1269 261 KB

The Landen development is made of 28 individual subdivisions clustered around Landen Farm Lake, with parks, schools, and unrelated subdivisions interspersed throughout.1920×1269 261 KB
Lake Waynoka is typical of large developments out in the countryside that are centered on an artificial lake. I’ve mapped both the residential landuse area and the CDP boundary, which includes some surrounding residences and woodland that aren’t part of the development. Within the gated community, there is a small area set aside as a campground and another as a recreational facility. There’s also an artificial beach beside the lake. These landuse-like areas overlap with the residential area in the sense that one can consider themselves to be located within both simultaneously.

Three different Lake Waynokas: the CDP, highlighted in orange, loosely circumscribing the landuse area, shaded in gray, centered around a spindly reservoir, all with the same name.1920×1269 95.6 KB

On the other end of the spectrum:

Hawthorne Woods is a small subdivision formed out of a single homestead:

Hawthorne Woods has nine houses around a tiny cul-de-sac.1920×1269 75.7 KB
Gateway Ridge is an infill development formed by clearing some woods at the edge of a much larger neighborhood and extending a cul-de-sac by several more yards.

Gateway Ridge consists of seven houses around a cul-de-sac.1920×1269 85.4 KB
Broadway Townhouses is an apartment complex.

Broadway Townhouses consists of three apartment buildings and a parking lot.1920×1269 87.6 KB

All these examples have in common the fact that they’re planned as homogeneous residential communities. Any deviation from that land use – for a pocket park or golf course – is incidental to the overall character of the development. I’m sure we can all think of existing place=* values that would describe each one of these examples, but no place=* value would be flexible enough to describe all of them without essentially meaning the same thing as landuse=residential.

dieterdreist · 2024-06-15T10:13:55.000Z

We have a plethora of place tags, including some quite exotic such as isolated_dwelling or farm (why don’t you draw a building or a farmyard instead?)

place=farm is the tag for a named place, while landuse=farmyard is about land used as farmyard, it isn’t about an individual farmyard, could also be just a part of a farmyard or several adjacent farmyards.
building on the other hand is typically smaller than the whole farm, a farm consists of buildings and the areas between /around. These are not alternatives but should be used complementarily.

dieterdreist · 2024-06-15T10:22:59.000Z

I don’t have a problem with this approach per se, but I do find named landuse areas to be a closer reflection of what these planned suburban developments are intended to be: a homogeneous area of land use, big or small, that is strongly associated with a particular name.

there is no guarantee of homogeneous landuse, it is just one ideology, the separation of functions, that led to this kind of urban structure in some regions, but it is already challenged if not considered outdated, by urban planners.

dieterdreist · 2024-06-15T10:28:34.000Z

I’m asking if you suggest housing estates of larger sizes can use =quarter etc, isn’t it that they can’t be indicated as housing estates first, which is using place=estate

what is the defining property for a place to be considered an “estate”? Is it the same owner, the same developer? The same architectural style? A fence around it? When the place is mapped as an area, you can easily see the predominant landuse (or mixed character) by looking at the landuse inside.

dieterdreist · 2024-06-15T10:35:00.000Z

Wetherington is a large gated community in Ohio with over 1,300 residents.

By the way, this is a good demonstration of what should not be done: include the delimiting roads. Or are there gates at the interstate where you enter and exit the community?

Minh_Nguyen · 2024-06-15T11:40:48.876Z

dieterdreist:

I don’t have a problem with this approach per se, but I do find named landuse areas to be a closer reflection of what these planned suburban developments are intended to be: a homogeneous area of land use, big or small, that is strongly associated with a particular name.

there is no guarantee of homogeneous landuse, it is just one ideology, the separation of functions, that led to this kind of urban structure in some regions, but it is already challenged if not considered outdated, by urban planners.

As a mapper, it isn’t for me to judge the ideology that produces this landuse. Urban planners have been discouraging car-centric suburban development for generations, but real estate developers are unfazed. They are in charge, and I can observe that they’ve built homogeneous landuse. If this is bad urban planning, let the map be a testament to that. Sometimes an old subdivision does get redeveloped, in which case the landuse area gets broken up and renamed, in the real world as in our world.

dieterdreist:

Wetherington is a large gated community in Ohio with over 1,300 residents.

By the way, this is a good demonstration of what should not be done: include the delimiting roads. Or are there gates at the interstate where you enter and exit the community?

If you’re referring to the boundary relation I highlighted in that screenshot, this is a census-designated place. A CDP represents a populated place with name and a certain population density. Its boundaries would be defined in terms of roads among other things – yes, even Interstates. The U.S. community has always had an uneasy relationship with the CDP boundaries, because they don’t really correspond to anything on the ground. In some cases, the extent may not even align completely with what the name refers to according to locals. I bring them up here to show that place areas come with their own challenges.

The landuse area corresponds much more closely to the residential development, though it also connects to some adjoining roadways. Indeed, the local community used to join landuse areas to roadways as a rule, based on essentially the same reasoning that I described in this thread about boundaries, but applied to property lines. We’ve since abandoned this approach, but there are still a great many landuse areas to detach from the roadway and move to… well, no one can agree what to move it to, but something away from the roadway.

A screenshot of the Wetherington landuse area excludes the subdivision named “The Fairways at Wetherington” but includes the actual fairways at the golf course within Wetherington.1920×1269 223 KB

Is it a neighborhood? Maybe by some definition of neighborhood, but terms from traditional place hierarchies like hamlet/village/town/city or neighborhood/quarter/suburb are very difficult to apply meaningfully to American suburbia or even country-living developments like Lake Waynoka, which after all are designed to provide an artificial experience.

osmuser63783 · 2024-06-15T11:44:31.476Z

Small aside, people are disagreeing here about when, if at all, named landuse areas are appropriate, but no one objected when I suggested documenting on the wiki how to put the node and the area for a place into a relation, so I’ve gone ahead and done that.

dieterdreist · 2024-06-15T11:54:18.000Z

oh yes, absolutely, what I meant was that while it may look in your region as if it is always like this, it may be different in other places, and if we settled on named landuse as the way to map these, it would create problems in these other areas, as the same or similar thing would probably have to be mapped quite differently.