OSM mapping in Malaysia ...

Beddhist · 2011-11-11T18:10:18.000Z

Yes, you may, Rajoo. I’m one of them, but as MasMap feeds into MSM I wasn’t going to mention it.

gvmsia · 2011-11-28T04:10:12.000Z

tq for the feedback re road categories. can someone please help me with this intersection… http://www.openstreetmap.org/?lat=3.086964&lon=101.646494&zoom=18&layers=M
at the traffic light, jln othman (east and west) has a divider. jln selangor (north) has a divider too. jln 1/21 (south) doesnt have any divider. how do i draw the point where jln 1/21 meets jln selangor? currently ive made the road split just before it reaches the intersection.

kucai · 2011-11-29T04:15:36.000Z

gvm,

There’s a couple of things with that intersection:

I wouldn’t create an intersection like that, since going from East to west you’ll have one way road that goes into two way road then back to one way. Instead, I suggest make them go all the way from E to W as one way. Same in regards going from E to N. Therefore, the intersection when viewed from East West to North, there are going to be 4 connections (points of intersects) between 4 objects( Jln Othman Eastwards road & westwards road, Jln Selangor North and South).
I would do like what you did with Jln Selangor going into 1/21. Except, those y branches need to have one way arrow at left and right branch.

Hope that helps.

gvmsia · 2011-11-29T13:28:37.000Z

tq kucai. fixed as u recommended.
i’m currently working on cleaning up, connecting roads, adding pois in the bottom half of pj. ive done sections 1-6, and 51. and going on to 7-10 and 52. if anyone spots errors in these sections, please let me know. hopefully i get it right the 1st time and dont have to redo much

feiming · 2011-11-30T13:05:09.000Z

Do you guys think we be ask for user:Malaysia section?

gvmsia · 2011-11-30T15:59:52.000Z

feiming:

Do you guys think we be ask for user:Malaysia section?

sure why not.

on another matter… lots of roads were drawn but not connected. after connecting them, i can see updated map on my nav app but routing sucks. some routes even join 2 dead end roads!! any ideas why?

feiming · 2011-12-01T02:11:56.000Z

I believe it’s because OSM previously don’t have high resolution satellite image for Malaysia.

i seen a lot of such road.If your using JOSM,you can see the history of a particular road. After awhile,you might notice the trend of error. If the road is really bad, i’ll delete and redo

kucai · 2011-12-01T02:55:02.000Z

gvmsia:

feiming:

Do you guys think we be ask for user:Malaysia section?

sure why not.

on another matter… lots of roads were drawn but not connected. after connecting them, i can see updated map on my nav app but routing sucks. some routes even join 2 dead end roads!! any ideas why?

Maybe try a different routing software? I would like to try routing, but perhaps shouldn’t considering the amount of crossing ways error and what not that I had corrected before

feiming · 2011-12-01T03:17:46.000Z

You use JOSM to test the route. It will show where the mistake are.
As for navigating,I’m using osmand but not relying on it.

My ultimate motivation is to implement traffic information using TPEGML

gvmsia · 2011-12-02T15:37:59.000Z

thanks. josm was good but it didnt sort out routing problem. most of the real errors it found were unnamed streets.

regard routing software…ive tried a few that use osm maps. all suck for navigation even in the area i fixed. sygic was good but its NOT free. anyway i dont think it uses osm maps

could someone please check this area and tell me wtf i’m doing wrong.

http://www.openstreetmap.org/?lat=3.09486&lon=101.64449&zoom=15&layers=M

feiming · 2011-12-03T10:03:42.000Z

gvmsia:

thanks. josm was good but it didnt sort out routing problem. most of the real errors it found were unnamed streets.

regard routing software…ive tried a few that use osm maps. all suck for navigation even in the area i fixed. sygic was good but its NOT free. anyway i dont think it uses osm maps

could someone please check this area and tell me wtf i’m doing wrong.
http://i153.photobucket.com/albums/s235/grv_2007/CaptureSmall.jpg
http://www.openstreetmap.org/?lat=3.09486&lon=101.64449&zoom=15&layers=M

That area looks real good

I Usually ignore unnamed street.What i really care is the routing and POI. I think that’s should the higher priority right now.

feiming · 2011-12-03T11:36:20.000Z

I just realize this thread was moved to user:Malaysia

feiming · 2011-12-04T15:23:22.000Z

Last Month’s Changes

gvmsia · 2011-12-05T10:58:52.000Z

wow cool! how exactly did u get that info? was it at http://www.itoworld.com/product/data/ito_map/main excuse for sounding blur but i cant see where to register!?!

thanks also for looking at my edit area. did u find out why i cant route properly?

feiming · 2011-12-05T14:30:37.000Z

Here you go.http://www.itoworld.com/product/osm

Last time i thought of stitch a high res for the whole Malaysia showing a year diff.But to much work.

gvmsia · 2011-12-06T06:36:35.000Z

thanks bro but i still cant see it… got link for forgot password but none for register!

no worries coz i just found the link http://www.itoworld.com/static/openstreetmap_tools/osm_mapper.html

cheewooi81 · 2012-11-06T12:55:46.000Z

Guys any compilation of tag used in Malaysia map? Currently updating and mapping Cheras area. Still new to mapping.

kc_voon · 2015-10-31T06:02:32.000Z

hi guys,
im new here and i just got my Epix watch.
I try to get the topo map for malaysia as i had problem on the basecamp after i install the contour line VFP malaysia.

Message error :
There is a problem with the VFP malaysia installation.
Please re-install VFP malaysia and start basecamp again.

i keep re download the VFP and re-install few time but same problem.

Please help.

AkuAnakTimur · 2015-11-01T17:12:14.000Z

kc voon:

hi guys,
im new here and i just got my Epix watch.
I try to get the topo map for malaysia as i had problem on the basecamp after i install the contour line VFP malaysia.

Message error :
There is a problem with the VFP malaysia installation.
Please re-install VFP malaysia and start basecamp again.

i keep re download the VFP and re-install few time but same problem.

Please help.

Sorry, I can’t really help with Garmin devices. Where did you get all the related files?

kucai · 2015-11-02T05:46:29.000Z

There is a DEM file in Osmand… very rough though…