"free" Navigator 10 by mapfactor.com ... uses OSM data

wyo · 2011-01-26T17:10:27.000Z

I’ve now tried it with backlight = system settings. It really turns off the backlight after my set timeout value, yet it also turns off my PocketLooX when the timeout is reached once again. Sure enough the GPS is also turned off loosing the position. How can I circumvent this?

Wyo

themlruts · 2011-01-27T04:25:50.000Z

why i love the product i am unable to figure out how to add a number address to destination. I am using the us version. I know i can search the web with google maps built in but when i am in my car with my computer that wont work. Can you but ih house numbers? am i missing something?
Thanks
Mike

mapfactor · 2011-01-28T12:16:09.000Z

Hello Mike,
you are right - the house numbers available on OSM are not converted to MCA files yet. Anyway, you should be able to search by country/city/street name (crossing) at the moment. There is no full-text search or google-like editfield
regards
Martin

RGPS · 2011-01-28T18:23:52.000Z

Question: change the hand drag from “Vector” to “Image” (software setting) increase the speed of the drag process.
The navigation process is accelerate, too ?
Batterie is better in “Image” instead of “Vector” ?

Thanks

RGPS · 2011-01-28T18:43:18.000Z

Question 2: The EARTH file is very heavy …(like a part of Germany). If we don’t download countries (Japan, New-Zealand, etcs…), can it navigate accross the world on Highway (like Exx/Axx in Europe) with the only EARTH file ?

mapfactor · 2011-01-31T09:32:23.000Z

RGPS:

Question: change the hand drag from “Vector” to “Image” (software setting) increase the speed of the drag process.
The navigation process is accelerate, too ?
Batterie is better in “Image” instead of “Vector” ?

No, as far as I know it should not have any influence on navigation or battery.

mapfactor · 2011-01-31T09:35:59.000Z

RGPS:

Question 2: The EARTH file is very heavy …(like a part of Germany). If we don’t download countries (Japan, New-Zealand, etcs…), can it navigate accross the world on Highway (like Exx/Axx in Europe) with the only EARTH file ?

The earth_osm.mca file contains the “mainland” info, i.e. coastline, country boundaries, major cities (only names in “overview” zoom) and the last update also names of countries. There are no network/routing data, so the answer is NO.

RGPS · 2011-01-31T18:14:32.000Z

thanks !

heyyou325 · 2011-02-05T18:49:48.000Z

I am looking for a (preferably free) replacement for Garmin n-route. I have Satellite internet so need to be careful of download size because of bandwidth limitations. How large (mb) is your program? I have the United States in OSM routable tiles already in img format for mapsource. Could I copy them and somhow convert them to your program? Or do I need all new map files. Also, is it possible (for a price) to get all the maps For the US, or US and Canada on a CD for your program so I don’t have to download them? I did not see a list of compatible GPS Devices, and would like to know if my Garmin 76CS will work with your program. Thank your for your help.

RGPS · 2011-02-07T21:02:12.000Z

countries covered are here : http://navigatorfree.mapfactor.com/en/maps/

MapFactor use “closed” format (.mca) created 1-2 times per month…files are downloaded by the application on PC and copying to “Storage mass” device after.

MapFactor Navigator 10 don’t use connection of the cellphone … EXCEPT for a “manual” location like with Google/Yahoo GPS search, but must have the connection online before (WM6.5.2) because Mapfactor don’t connect the 3G/CDMA device automaticly.

nafg · 2011-02-08T03:41:20.000Z

Is there any way to get new mca or cab versions from a Linux computer?

Thanks.

mapfactor · 2011-02-08T09:28:11.000Z

nafg:

Is there any way to get new mca or cab versions from a Linux computer?

At the moment the only way is to use wine (http://appdb.winehq.org/objectManager.php?sClass=version&iId=22242).

RGPS · 2011-02-11T21:06:54.000Z

BUG: i have an HTC HD with internal GPS antenna…but i use an external 10Hz antenna, too.

Navigator10 not able to use a custom port…i can only choose a “declared in registry” port (COM4, my internal antenna…the COM6 isn’t displayed).

I view my 10Hz antenna in Navigator GPS setting (it’s a bluetooth Qstarz 818XT), but Navigator can’t connect to this antenna.
I use a logger program (GPS2Blue) and have not this problem…(10Hz nmea log OK).

According to this thread : http://blogs.msdn.com/b/raffael/archive/2008/05/28/gps-antenna-on-windows-mobile-internal-or-external.aspx
It’s a knowned problem…Can you add a “raw” COM port in Navigator ? To bypass the GiD of Windows Mobile ?

SOLVED: I have a ROM 6.5.2 from NRG, i have flashed to the STOCK Rom on the HTC Touch HD (6.1) and the Navigator 10 work now with my 10Hz antenna.

Strange…

Willi2006 · 2011-02-22T03:55:30.000Z

RGPS:

Also, when recording a route, what is the logging interval ? I haven’t found an option to set this.

mapfactor:

There is no such a option yet - it is every second and it used to be primarily for debugging and not necessarily for mapping. What interval would you use?

RGPS:

that’s not true (on my Touch HD) … the rate is more like “every 15-30 meters”.
I can not use the Navigator10 to GPX traces, it’s not accurate (in Bike).

In my experience Navigator just records the raw NMEA data, i.e. as they are delivered by the GPS receiver. E.g. my TomTom Wireless GPS receiver (Bluetooth) can deliver more than one point per second. And Navigator records them all when running on my netbook without other active programs. And that’s great because the maximum possible track points are available for mapping. In other software like the JOSM plugin livegps or OSMtracker the minimum you can configure is 1 second. And even this is only reached on a fast device which isn’t busy with other tasks. E.g. with my old PDA Qtek 2020i and the same GPS receiver I rarely get recorded one point per second but one every 3 or 5 seconds.

I recommend to have a look at the abilities, the settings and the other tasks running on your device. I’m quite sure it’s not Navigator’s fault.

Willi2006 · 2011-02-22T04:44:09.000Z

heyyou325:

I am looking for a (preferably free) replacement for Garmin n-route.
…
I did not see a list of compatible GPS Devices, and would like to know if my Garmin 76CS will work with your program.

Currently Navigator runs great on Windows PC and on Windows Mobile, also on my old Windows PocketPC.

For Garmin have a look at OSM Wiki Garmin. Many OSMer create maps for Garmin devices and offer downloads for free OSM Map on Garmin / Download.

maxbolo · 2011-04-12T12:05:35.000Z

Hi all
I’ve installed Navigator 10 free and loaded Italy map.

The program starts, then crashes.
The log file says:
ERR 2011/04/12 08:13:54 Exception thrown: .\src\PoolFont.cpp(211)
ERR 2011/04/12 08:13:54 Exception mpfc::exception& ex caught: .\src\PoolFont.cpp(251) message:‘mapFactor exception: PoolFont::idFont - can’t retrieve font Tahoma, Regular.’
ERR 2011/04/12 08:13:54 Exception thrown: .\src\PoolFont.cpp(211)
…
…
ERR 2011/04/12 08:13:54 Exception thrown: .\src\filedriver\ArchiveManager.cpp(70)
ERR 2011/04/12 08:13:54 Exception mpfc::exception& ex caught: .\src\mpfc\PictureReader.cpp(30) message:‘mapFactor exception: ArchiveManager: archive ‘C:\Users\Maxbolo\Desktop/Data\images\sign.mca’ not found’
DMP 2011/04/12 08:13:54 Routing: opened italy_osm as 0.
…
…
ERR 2011/04/12 08:13:54 Exception thrown: .\src\TextAtom.cpp(52)
DMP 2011/04/12 08:13:54 __except-ion handling (hard crash)

Someone can help me?

Thanks

mapfactor · 2011-04-12T14:21:40.000Z

Hi maxbolo,
it looks like some parts of PC Navigator were not properly installed? Did you manually removed some downloaded data? Can you send me whole navigator.log.txt?
thanks
Martin

maxbolo · 2011-04-13T07:35:23.000Z

Hi Martin,
pc navigator seems to have some magic autocorrective function… today I try again to run it for make a brand new log for you and always run well!!!

Thank you

maxbolo · 2011-04-14T11:50:07.000Z

I have some other issue, so I re-install PC Navigator and the maps and now seems to work perfectly.

mapfactor · 2011-04-20T13:31:07.000Z

only a small update about House Numbers (I was asked about them repeatedly)

mapfactor:

… the house numbers available on OSM are not converted to MCA files yet. Anyway, you should be able to search by country/city/street name (crossing) at the moment.

Since March 2011 data you should see some house numbers even in application with OSM data. It was only first attempt to see the data and if simple approximation could have any value for users. There were no comments about it, so it probably did not work well (?). Used tags were ‘addr:street’, ‘addr:housenumber’ and ‘addr:streetnumber’ (with higher priority).

Note, that this is only the first step and more complex cases will hopefully follow soon …
regards
Martin